Skip to product information
1 of 2

Challenger Lifts

Challenger SA10 - 10,000 LB Capacity 2 Post Lift

Challenger SA10 - 10,000 LB Capacity 2 Post Lift

Regular price $5,470.00 USD
Regular price $0.00 USD Sale price $5,470.00 USD
Sale Sold out

ALI Certified

 

Challenger Lifts' SA10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop. The SA10 features 3-stage front arms that provide maximum extension and retraction ensuring safe and reliable lifting on all vehicles within rated capacity

With adjustable height and width options, double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the SA10 will accommodate the rigorous demands of a full service facility. Available in red and blue.

Our two post lifts come with accessories to turn your two post vehicle lift into a complete productivity center. All Challenger two post lifts are designed and manufactured to the highest standards for performance, durability and longevity.

Optional Accessories

Challenger 10315 Stack Adapter Extension KitStack Adapter Extension Kit P/N 10315
Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.


Features
  • 3-stage front arms provide greater overall arm sweep
  • Set up in a symmetric or asymmetric configuration
  • Adjustable height and width options accommodate varying service bay sizes
  • Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
  • Rubber foot pads minimize stress to vehicles with delicate undercoatings
  • Padded overhead shut off system prevents vehicle damage
  • Single-point mechanical lock release system allows technician to disengage both columns simultaneously
  • Wide rubber door guards protects vehicle from door damage
  • Premium powder coat finish provides long-lasting durability
  • Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability
  • Mirrored “S” shaped column
Challenger SA10 Features
Challenger SA10 Arms Coverage


Model Number
SA10

Lift Configuration

Symmetric Configuration
Asymmetric Configuration

Lift Capacity*

10,000 lbs. (4536kg)
A - Rise Height 1
74.5" (1892mm)
B - Overall Height
136.5”
C - Overall Height (Cylinder Extended)
142.5"
2’ Height Extension Available
Yes
D - Overall Width
129” / 135”
131.5” / 137.5”
E - Drive-Thru Clearance
92.75” / 98.75”
88.5” / 94.5”
F - Floor to Overhead Switch
131.125” / 137.125”
G - Short Arm Reach
22.375” / 41.5”
H - Long Arm Reach 2 (min/max)
38.25” / 59”
I - Screw Pad Height
4.75” / 6.875”
J - Inside of Columns
106.75” / 112.75”
101.5” / 107.5”
Motor
2HP, Single Phase, 60Hz
Voltage
208v - 230v
Speed of Rise
48 seconds
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
12 (3658mm)

*Lift capacity ratings are based on loads equally distributed on all four arms.

  1. Rise Height is measured with telescoping screw pads in highest position.
  2. Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm)
  3. Overall width of Asymmetric lift is 11' 3"' / 11' 9" including power unit


Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction

 


SA10 Two Post Lifts

View full details